Multi-angle impact test apparatus is designed and manufactured by Labthink Instruments Co., Ltd, according to GB/T 17876: Packaging Container-Tamper Evident Plastic Closure, it can be used to test the impact resistance of bottle caps.
The plastic bottle (0.6~2L) with round neck can be fixed in the rotatable shell of the test apparatus. Then a customized steel ball, 41mm in diameter and 286g in weight, will be dropped from 762mm above the bottle cap and then impacts the cap. The user can observe whether the bottle cap is broken or falls off the bottle.
The angle of impact test can be adjusted by turning the rotatable shell or changing the position of sliding track of the test apparatus. Four test modes are available i.e. top vertical direction impact test, edge vertical direction impact test, 45 degree to edge impact test and side vertical direction impact test. The height of the bottle to be tested can be from 200mm to 360mm. The outer diameter of the bottle cap can be 65~110mm. The maximum diameter of the bottle neck should be equal to or greater than 65mm.
Labthink Instruments Co., Ltd, is always dedicated to providing customers with packaging testing solutions and helping the manufacturers fulfill the goals of quality and safety assurance, through improvement of packaging testing techniques and development of high-end packaging testing instruments.